Views: 0 Author: Site Editor Publish Time: 2023-08-19 Origin: Site
1. Turn off the engine and power off the vehicle (make sure the vehicle power is turned off and not powered on before installation), remove the rear bumper, insert it from the inside of the bumper skin, and buckle it to the bumper.
2. When connecting the radar harness and the radar sensor plug to the vehicle, do not place too many obstacles in front of the radar probe.
3. Start the car, turn on the power, put the reverse gear, and put an obstacle within 20-30CM on the rear side to test whether the induction is normal. If you hear the buzzer beeping, or the display shows an obstacle, it means it can be used.
4. Fix the bumper to the body and the installation is complete.